Fuel Cell Production Testing Machines
Please consider our equipment for your fuel cell production line, given our achievements in areas such as coaters, slitters, and pressing machines.
We have technologies and equipment for various processes in the production of fuel cells (SOFC, PEFC).
We offer a variety of equipment for the fuel cell industry utilizing our technologies in areas such as coating, pressing, slitting, and assembling.
FC testing machines
Here are some of our test machines.
Coating Test Machine
If you are interested in a roll-to-roll coating test, you can use our test machine.
For details, please visit the "Coating Test Machine" page.
If you are interested in a sheet-by-sheet coating test, you can use our test machine.
For details, please visit the "Multi Lab Coater" page.
Electro Spray Coating (ESC)
- Budget-pleasing configuration.
- Accommodates a wide range of coating thicknesses (from a few to hundreds nm at room temperatures and atmospheric pressures)
- Even a small amount of slurry (approx. 20 cc) is enough for coating.
- Enables pattern coating using masks.
If you are interested in a slitting test, you can use our test machine.
For details, please visit the "Slitting Test Machine" page.
Roll press machine
Roll Press Machine Specifications
|Applicable pressing width||Max. 350 mm (Feed width: Max. 400 mm)|
|Applicable pressing force||Max. 10 kN/cm (35 tons with 350 mm width)|
|Heat roll temperature||80°C (normal) to 150°C|
|Pre-heating roll||S-shaped wrapping type, 80 °C (normal) to 150°C|
|Material feed speed||5 to 100 m/min|
|Material feed tension||30 to 200 N/width|
|Clearance||Up to 900 μm (Up to 500 μm at 150°C)|
|Press roll diameter||φ500 mm|
- CONTACT US
Tokyo office: +81-3-3241-1491